Fuel and Oil Testing Suite

Oil analysis testing suite

The following oil tests 1 to 5 are covered under the standard sample price. Test 8 is included for hydraulics. Other services (from 6) are available at extra cost. fuel oil testing - oil analysis testing, Coolant and Grease Analysis - Sitemap

See our technical Information pages for more information on some of these oil tests.

  1. Full spectrographic analysis of wear metals, oil additives, contaminants by ICP (ASTM D5185). Readings are given in ppm (parts per million).
  2. Total ferrous debris (FW/PQ), including large particles using a 51FW meter. Units are dimensionless.
  3. Viscosity at 40°C (ASTM D445). Units in Centistokes (cSt).
  4. TIM (Total Insoluble Matter) given as '% insoluble'. Or infrared analysis of engine samples to monitor oil condition and degradation. Reported as '% allowable'. ‘Caterpillar method.’
  5. Water analysis (ASTM D1744).
  6. The following are also carried out at the discretion of the interpreter:
  • Fuel contamination by closed-cup flash point (ASTM D3278)
  • Anti-freeze by wet chemical analysis,
  • Ferrography & Wear Debris Analysis are carried out when necessary
  • Photographic evidence can also be included to support/record the findings
  1. TAN & TBN are also available to IP177/400
  2. Particle Counting to ISO 4406 is available.
  3. Coolant analysis. Bespoke.
  4. Diesel fuel analysis. Bespoke.
  5. Brake fluid analysis. Bespoke.
  6. Grease analysis. Bespoke.
  7. Transformer oil analysis. Bespoke.
  8. Thermography.

The report comes with a recommendation if required. This is based on knowledge of similar or known components, derived from many years of experience in the oil analysis field. The standard report layout is typically in PDF format, and is e-mailed to facilitate a fast turnaround.
See: Sample report or read what to expect in a oil testing report.

Clients of Oil Check or Emerson software can import directly into their own databases, created automatically. This enables easy handling and management of data.
Kit prices include full analysis and return postage.

Expected turnaround is less than 2 working days but less than 1 day is fairly typical.

An 'Urgent' service is available by arrangement. Tel:01302 329609 for assistance.
We work to
ISO9001:2008 and
BS EN ISO14001:2004
standards
Oil analysis standards

back to top

  • Oil Check Laboratory Services Ltd
  • Registration: 6393078
  • Registered Office : 9/11 Thorne Road, Doncaster, DN1 2HJ
  • designed by SMP designs
  • The OCLS laboratory in Doncaster provides custom oil analysis kits, standard oil test services and a range of software support /downloads Our testing methods include: Particle counting oil test, FTIR oil analysis, Viscosity oil testing, TAN and TBN oil analysis, Karl Fischer Moisture Titration, Spectroscopic Oil Analysis, fuel filtration, fuel and coolant analysis and diesel fuel analysis with Flashpoint analysis.